1.$ SHOW DEVICES
Device Device Err. Volume Free Trans Mount
Name Status Count Label Blocks Count Count
DKA0: Online mnt 0 VMS 47088 115 1
DKA1: Online mnt 0 USERPACK1 45216 2 1
DKA2: Online mnt 3 DOCUMENT 8068 20 1
DKA5: Online mnt 0 MASTERP 28668 1 1
DKA6: Online 0
DKA7: Online mnt 0 PROJECT 110547 1 1
DMA0: Online 0
DLA0: Online 0
DYA0: Online 0
DYA1: Online 0
DRA3: Online mnt 0 RES26APR 29317 1 1
In this example, the SHOW DEVICES command displays the
following information for each device on the system:
o Device name
o Device status and characteristics (status indicates whether
the device is on line; characteristics indicate whether the
device is allocated, is spooled, has a volume mounted on it,
or has a foreign volume mounted on it)
o Error count
o Volume label (for disk and tape volumes only)
o Number of free blocks on the volume
o Transaction count
o Number of mount requests issued for the volume (disk devices
only)
2.$ SHOW DEVICES /FULL $1$dga30
Disk $1$DGA100: (EUROS), device type HP MSA VOLUME,
is online, mounted, file oriented device, shareable,
available to cluster, error logging is enabled.
Error count 0 Operations completed 17299
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 3 Default buffer size 512
Current preferred CPU Id 0 Fastpath 1
Total blocks 488327805 Sectors per track 96
Total cylinders 52987 Tracks per cylinder 96
Logical Volume Size 488327805 Expansion Size Limit 941752320
Host name "EUROS" Host type, avail HP rx2600 (
900MHz/1.5MB), yes
Allocation class 1
Volume label "DEBUG-DISK1" Relative volume number 0
Cluster size 480 Transaction count 2
Free blocks 16558560 Maximum files allowed 507617
Extend quantity 5 Mount count 2
Mount status System Cache name "_$7$DKD100:XQPCACHE"
Extent cache size 64 Maximum blocks in extent cache 1655856
File ID cache size 64 Blocks in extent cache 581760
Quota cache size 0 Maximum buffers in FCP cache 314
Volume owner UIC [SYSTEM] Vol Prot S:RWCD,O:RWCDG:RWCD,
W:RWCD
Volume Status: ODS-2, subject to mount verification,
file high-water marking, write-back caching enabled.
Volume is also mounted on EUROS.
In this example, the SHOW DEVICES command requests a full
listing of the status of the multipath device $1$DGA30. This
device has four local Fibre Channel paths and one remote (MSCP-
served) path.
3.$ SHOW DEVICE/FULL DKB0:
Disk $DKB0:, device type RZ56, is online, mounted, file-oriented
device, shareable, error logging is enabled.
Error count 0 Operations completed 392750
Owner process "" Owner UIC [1,4]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 317 Default buffer size 512
Total blocks 1299174 Sectors per track 54
Total cylinders 1604 Tracks per cylinder 15
Volume label "SYSTEM_DISK" Relative volume number 0
Cluster size 3 Transaction count 278
Free blocks 367632 Maximum files allowed 162396
Extend quantity 5 Mount count 1
Mount status System Cache name "$DKB0:XQPCACHE"
Extent cache size 64 Maximum blocks in extent cache 36763
File ID cache size 64 Blocks currently in extent cache 36258
Quota cache size 0 Maximum buffers in FCP cache 210
Volume owner UIC [1,1] Vol Prot S:RWCD,O:RWCD,G:RWCD,W:RWCD
Volume status: ODS-2, subject to mount verification, protected
subsystems enabled, file high-water marking, write-through
XQP caching enabled, write-through XFC caching enabled.
In this example, the SHOW DEVICES command requests a full
listing of the status of the RZ56 device DKB0.
4.$ SHOW DEVICES/REBUILD_STATUS
Device Name Rebuild needed?
ADU15$DKA300: Information unavailable
EDIV$DKA300: Information unavailable
EMUL$DKB200: No
EMUL$DKB300: No
EMUL$DKB500: Yes
FTA0: Not applicable
OPA0: Not applicable
In this example, the volume mounted on device EMUL$DKB500 needs
rebuilding.
5.$ SHOW DEVICES/FULL NODE2$
Disk NODE2$DUA0:, device type RA81, is online, mounted,
error logging enabled
Error count 0 Operations completed 24195
Owner process name Owner UIC [11,177]
Owner process ID 20200000 Dev Prot S:RWPL,O:RWPL,G:RWPL,W:RWPL
Reference count 16 Default buffer size 512
Volume label VMSDOCLIB Relative volume no. 0
Cluster size 3 Transaction count 17
Free blocks 525447 Maximum files allowed 111384
Extend quantity 5 Mount count 1
Volume status System ACP process name
Caching disabled
Volume is subject to mount verification, file high-water marking
Disk NODE2$DUA1:, device type RA81, is online, error logging enabled
Error count 0 Operations completed 0
Owner UIC [0,0] Owner process name
Owner process ID 20200000 Dev Prot S:RWED,O:RWED,G:RWED,W:RWED
Reference count 0 Default buffer size 512
.
.
.
In this example, the user requested a full display of
information about each device on NODE2 in the OpenVMS Cluster.
Information is shown here only for the first two devices: a
mounted device and a device that is not mounted.
6.$ SHOW DEVICES MUA1/FULL
Magtape $4$MUA1: (HSC70), device type TA79, is online, device is
equipped with a stacker/loader, file-oriented device, available
to cluster, error logging is enabled.
Error count 0 Operations completed 0
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 0 Default buffer size 2048
Density 1600 Format Normal-11
Host name "HSC70" Host type, avail HS70, yes
Allocation class 4
Volume status: no-unload on dismount, odd parity.
In this example, the user requested a full display of the tape
device MUA1.
7.$ SHOW DEVICE/FULL $1$DKA221
Disk $1$DKA221: (HSC952), device type RZ29, is online, mounted,
file-oriented device, shareable, available to cluster, error
logging is enabled.
Error count 0 Operations completed 6509
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 108 Default buffer size 512
Current preferred CPU Id 1 FastPath 1
Total blocks 8380080 Sectors per track 4
Total cylinders 65470 Tracks per cylinder 32
Host name "HSC952" Host type, avail HS95, yes
Allocation class 1
Volume label "GALAXY_X6L5" Relative volume number 0
Cluster size 4 Transaction count 302
Free blocks 4691760 Maximum files allowed 838008
Extend quantity 5 Mount count 2
Mount status System Cache name "_$1$DKA221:XQPCACHE"
Extent cache size 64 Maximum blocks in extent cache 469176
File ID cache size 64 Blocks currently in extent cache 237504
Quota cache size 0 Maximum buffers in FCP cache 1734
Volume owner UIC [1,1] Vol Prot S:RWCD,O:RWCD,G:RWCD,W:RWCD
Volume Status: ODS-2, subject to mount verification, protected
subsystems enabled, file high-water marking, write-through
XQP caching enabled, write-through XFC caching enabled.
Volume is also mounted on MEAD.
This disk is a device that performs its I/O through the Fast
Path port PNA0. Fast Path is enabled for this disk, and its
I/O will be processed on the preferred CPU, CPU 1, which is
associated with its Fast Path port PNA0.
The /FULL qualifier also displays additional information about
Fast Path devices. A Fast Path device may be either a class
device or a port device. An example of a class device is an
HSC disk, and an example of a port device is the CI. For both
Fast Path class devices and ports, the display indicates that
Fast Path is enabled and lists the current CPU ID to which that
device is assigned. Additionally, for a Fast Path port, the
display indicates the port's user-established CPU preference
(if any).
The current preferred CPU and the User Preferred CPU can be
set by using the DCL command, SET DEVICE/PREFERRED_CPU, or by
issuing a $QIO.
For more information about using Fast Path features to improve
I/O performance, see the VSI OpenVMS I/O User's Reference
Manual.
8.$ SHOW DEVICE/FULL PNA0
Device PNA0:, device type CIXCD, is online, shareable, error logging
is enabled.
Error count 0 Operations completed 0
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G,W
Reference count 0 Default buffer size 0
Current preferred CPU Id 1 FastPath 1
The above display shows that port PNA0 is assigned to CPU 1 and
that Fast Path is enabled.
9.$ SHOW DEVICE/FULL PNA0
Device PNA0:, device type CIXCD, is online, shareable, error logging
is enabled.
Error count 0 Operations completed 0
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G,W
Reference count 0 Default buffer size 0
Current preferred CPU Id 1 FastPath 1
User preferred CPU Id 2
This example shows a Fast Path assignment made by a user.
Normally, the User Preferred CPU ID matches the current
preferred CPU ID. The reason for the mismatch in the above
display is because CPU 2 was stopped. The port was previously
assigned to CPU 2. But when CPU 2 was stopped, the operating
system moved the port assignment from CPU 2 to CPU 1.
If CPU 2 were started, the operating system would assign the
device to the User Preferred CPU.
10$ SHOW DEVICE/FULL DSA0
Disk DSA0:, device type RAM Disk, is online, mounted, file-oriented
device, shareable, available to cluster, error logging is enabled,
device supports bitmaps (no bitmaps active).
Error count 0 Operations completed 47
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 2 Default buffer size 512
Total blocks 1000 Sectors per track 64
Total cylinders 1 Tracks per cylinder 32
Volume label "TST0" Relative volume number 0
Cluster size 1 Transaction count 1
Free blocks 969 Maximum files allowed 250
Extend quantity 5 Mount count 1
Mount status System Cache name "_$252$DUA721:XQPCACHE"
Extent cache size 64 Maximum blocks in extent cache 96
File ID cache size 64 Blocks currently in extent cache 0
Quota cache size 0 Maximum buffers in FCP cache 404
Volume owner UIC [SYSTEM] Vol Prot S:RWCD,O:RWCD,G:RWCD,W:RWCD
Volume Status: ODS-2, subject to mount verification, file high-water
marking, write-back XQP caching enabled, write-through XFC caching
enabled.
Disk $252$MDA0:, device type RAM Disk, is online,
member of shadow set DSA0:.
Error count 0 Shadow member operation count 128
Allocation class 252
Disk $252$MDA1:, device type RAM Disk, is online,
member of shadow set DSA0:.
Error count 0 Shadow member operation count 157
Allocation class 252
This example shows that a write bitmap exists for a shadow set,
and that no write bitmap is active. If a shadow set supports
write bitmaps, "device supports bitmaps" is displayed along
with either "bitmaps active" or "no bitmaps active". If the
device does not support write bitmaps, no message pertaining to
write bitmaps is displayed.
11$ SHOW DEVICE/BITMAP DSA13
Device BitMap Size Percent Type of Master Active
Name ID (Bytes) Populated Bitmap Node
DSA13: 00010007 8248 0.01% Minimerge IPA Yes
This example shows a SHOW DEVICE/BITMAP display. In this
example, the bitmap is an HBMM bitmap that is active on node
IPA.
The /BITMAP qualifier is similar to the /REBUILD qualifier
in that neither can be combined with most other SHOW DEVICE
qualifiers. The SHOW DEVICE/BITMAP display can be brief or
full; brief is the default. Use the /FULL qualifier to view the
entire display.
If no bitmap is active (or the device is not mounted), no
bitmap file ID is displayed. The phrase "no bitmaps active"
is displayed.
12$ SHOW DEVICE/FULL EWA0
Device EWA0:, device type DEGXA, is online, network device, error lo
logging is enabled, device is a template only.
Error count 1 Operations completed 0
Owner process "" Owner UIC [SYSTEM]
Owner process ID 00000000 Dev Prot S:RWPL,O:RWPL,G,W
Reference count 0 Default buffer size 2
Current preferred CPU ID 0 Fastpath 1
Current Interrupt CPU ID 0
Operating characteristics: Link up, Full duplex, Autonegotiation,
Jumbo frames.
Speed (Mbits/sec) 1000
Def. MAC addr 00-D0-59-61-6A-B2 Current MAC addr 00-D0-59-61-6A-B2
This example shows information regarding the LAN template
device EWA0. Only the template device displays the state of
the link. In this example, the link is up.
13SHOW DEVICE/FULL EIA4
Device EIA4:, device type i82559, is online, network device,
error logging is enabled.
Error count 0 Operations completed 375225
Owner process "NETACP" Owner UIC [SYSTEM]
Owner process ID 39800425 Dev Prot S:RWPL,O:RWPL,G,W
Reference count 2 Default buffer size 1498
Operating characteristics: Full duplex, Autonegotiation.
Speed (Mbits/sec) 100
Def. MAC addr 00-08-02-AF-EC-D4 Current MAC addr AA-00-04-00-CD-4D
Protocol name DECNET Protocol type 60-03
This example show information regarding the LAN device EIA4.
As this device is specific to a particular LAN protocol,
information regarding that protocol is displayed; this
information is not displayed for the template device in the
previous example, as there is no protocol associated with the
template service.