Library /sys$common/syshlp/LATCP$HELP.HLB  —  SHOW  NODE  Examples
    1.LATCP> SHOW NODE/FULL

      The SHOW NODE command in this example produces the following
      display of information about the local node:

        Node Name:   LTC                  LAT Protocol Version:      5.2
        Node State:  On
        Node Ident:  LTC - Engineering Development

        Incoming Connections:  Enabled    Incoming Session Limit:   None
        Outgoing Connections:  Enabled    Outgoing Session Limit:   None
        Service Responder:     Disabled

        Circuit Timer (msec):        80   Keepalive Timer (sec):      20
        Retransmit Limit (msg):      20   Node Limit (nodes):       None
        Multicast Timer (sec):       20   CPU Rating:                  8
        Maximum Unit Number:       9999

        User Groups:     43, 73
        Service Groups:  7-9,13,23,40,43,45,66,72-73,89,120-127,248-255

        Service Name     Status      Rating  Identification
        LTVMS            Available     31 D  .

      This display indicates that the local node LTC is in the On
      state, which means LAT connections can be created on the
      node. LTC is running Version 5.2. of the LAT protocol. The
      identification of the node is "LTC - Engineering Development".
      Because this is the local node, the display does not give
      the address of a LAN device. Use the SHOW LINK command to
      find addresses of devices on the local node. The display for
      the status of remote nodes, as shown in Example 2, gives the
      Ethernet address of that node.

      Both incoming and outgoing connections can be made on node LTC,
      the number of sessions is unlimited. The display indicates the
      values of various timers and lists the groups that are enabled.
      Users on the local node can access service nodes belonging to
      user groups 43 and 73. Locally offered services can be accessed
      by nodes belonging to the service groups listed.

      The display indicates that the CPU rating of the local node
      is 8. The display shows that the node offers a service named
      LTVMS. This service is available and its rating is 31 D
      (dynamic). (An S would indicate the rating is static.)

    2.LATCP> SHOW NODE/FULL RWWUP

      The SHOW NODE command in this example produces the following
      display about the remote node RWWUP:

        Node Name:   RWWUP              LAT Protocol Version:      5.2
        Node State:  Reachable          Address:     AA-00-04-00-11-10
        Node Ident:  .

        Incoming Connections:  Enabled

        Circuit Timer (msec):        80
        Multicast Timer (sec):       20

        Service Groups:  7, 13, 42-43, 45, 66, 70-72, 75-82, 88-89

        Service Name     Status      Rating  Identification
        NAC              Available     28    .
        SYSMGR           Available     28    .

      This display indicates that remote node RWWUP is reachable and
      runs Version 5.2 of the LAT protocol. The display includes the
      Ethernet address of node RWWUP. Because incoming connections
      are enabled, you can connect to a service on node RWWUP,
      provided that your node belongs to one of the service groups
      listed in the display.

      Node RWWUP offers two services: NAC and SYSMGR. Both are
      available.

    3.LATCP> SHOW NODE/ALL/BRIEF

      The SHOW NODE command in this example produces the following
      display about all nodes known to the local node:

        Node Name       Status       Identification
        ---------       -----------  -----------------------------------
        ABLAN           Reachable     Unauthorized access is prohibited.
        ASKWEN          Reachable     .
        CHUNK           Reachable     A member of the MAIN VMScluster
                  .
                  .
                  .
        UTOO            On            Can be healthy at the Center
        VULCUN          Reachable     Beam me up
        ZENX            Reachable     ZENX

      The SHOW NODE command in this example indicates the status
      (whether a node is reachable) and identification of all nodes
      known to the local node. Note also that the display includes
      the status of the local node UTOO. The status can be either On,
      Off, or Shut. Here it is On.

    4.$ LCP :== $LATCP
      $ LCP SHOW NODE /STATUS

      The SHOW NODE /STATUS in this example produces the following
      display:

        Node Name:   NODE1                       LAT Protocol Version: 5.2
        Node State:  On
        Node Ident:  Test system

                                   Current   Highest   Maximum
                                   -------   -------   -------
        Active Circuits:                 1         2      1023
        Connected Sessions:              1         6    260865
        Incoming Queue Entries:          0         0        24
        Outgoing Queue Entries:          0         1     32767
        Unprocessed Announcements:       0         7       500
        Unprocessed Solicits:            0         2       250

        Local Services:                  1         2       255
        Available Services:            188       194       N/A
        Reachable Nodes:               166       172       N/A

        Discarded Nodes:                 0
Close Help