The RPC control program (rpccp) provides a set of commands
           for managing the endpoint map.

           You can use control program commands from within the control
           program or from the system prompt (represented here as a $).

             o  From inside the control program:

                You can start and enter the control program using the
                rpccp command alone, without any argument. The control
                program then displays the control program prompt
                (rpccp>), as follows:

                $ rpccp
                rpccp>

                You can then enter any control program command, for
                example:

                rpccp> show mapping

                You leave the control program and return to the system
                prompt using the exit or quit command.

                If you enter invalid input, the control program
                displays the valid commands.

             o  From the system prompt:

                Interactively or in a command procedure, enter the
                rpccp command with an internal command of the control
                program as the first argument.

1  –  Arguments and Options

           Except for the exit and quit commands, rpccp commands have
           one or more options.  Each option is identified by a hyphen
           (-) followed by a letter; for example, -s. Some options
           require arguments.

           ___________________________________________________________
           Function          At System Prompt   Inside Control Program
           ___________________________________________________________
           Strings within    Supported          Not required
           quotation marks

           Wildcard          Supported          Unsupported
           substitution
           ___________________________________________________________

2  –  RPC Control Program Commands

           _________________________________________________________
           Scope          Command          Unsupported in RPC-only
                                           Configuration
           _________________________________________________________

           All entries    add entry               X
                          remove entry            X
                          show entry              X

           Server entry   export                  X
                          import                  X
                          show server             X
                          unexport                X

           Group          add member              X
                          remove group            X
                          remove member           X
                          show group              X

           Profile        add element             X
                          remove element          X
                          remove profile          X
                          show profile            X

           Endpoint map   remove mapping
                          show mapping
           ____________________________________________________