1  –  IL_BADVMSPWD

 your DCE password is not a valid OpenVMS password; OpenVMS
 password not synchronized

 	Explanation:

 	The user logged in specifying a DCE password. The user's DCE password
 	and OpenVMS password are different. The OpenVMS password was not
 	sucessfully synchronized to match the DCE password because the DCE
 	password is not a valid OpenVMS password.

 	User Action:

 	Set the DCE password to a value that is a valid OpenVMS password.

2  –  IL_DCECERT

 certified DCE login for <username> as principal "<principal>"

 	Explanation:

 	The user successfully logged in to OpenVMS and DCE. The credentials
 	are certified.

 	User Action:

 	None.

3  –  IL_DCENOCERT

 non-certified DCE login for <username> as principal "<principal>"

 	Explanation:

 	User successfully logged in to OpenVMS and DCE. The
 	credentials are not certified.

 	User Action:

 	None.

4  –  IL_DCEPWDEXP

 your DCE password has expired and must be reset

 	Explanation:

 	The DCE password has expired.

 	User Action:

 	Change your DCE password by entering the CHPASS command.

5  –  IL_ERRVMSPWD

 error synchronizing OpenVMS password with DCE password

 	Explanation:

 	The user logged in specifying a DCE password. The user's DCE password
 	and OpenVMS password are different. The OpenVMS password was not
 	sucessfully synchronized to match the DCE password because
 	an error occurred during synchronization.

 	User Action:

 	Set the DCE password to a value that is a valid OpenVMS password.

6  –  IL_INVPWDLEN

 password must be between 'number' and 32 characters

         Explanation:

         Your DCE password could not be set to the same value as your
         OpenVMS password because its length was invalid.

         User Action:

         Set your DCE password to a value that is the length range
         of the error message.

7  –  IL_NOCREDMOD

 unable to modify owner field of credential files

 	Explanation:

 	The credential files could not be set up correctly. The user
 	will not see this message.

 	User Action:

 	Submit a Quality Assurance Report (QAR).

8  –  IL_NONETCRED

 network credentials not obtained

 	Explanation:

 	A problem in the network prevented Integrated Login from obtaining
 	information about the principal from the DCE registry; therefore,
 	network credentials were not given.

 	User Action:

 	Try logging in later with DCE_LOGIN.  If you still receive this error,
 	ask your cell administrator to troubleshoot the network.

9  –  IL_RGYNOTTHERE

 unable to access DCE registry

 	Explanation:

 	The DCE registry was not available when you logged in.  You do
 	not have DCE credentials; you are logged into OpenVMS only.

 	User Action:

 	Ask your system manager to correct the problem.

10  –  IL_VMSONLY

 DCE login as principal "<principal>" failed, OpenVMS login to
 <username> successful

 	Explanation:

 	The DCE login failed but the OpenVMS login was successful. This occurs
 	when the user's DCE and OpenVMS passwords are different and the user
 	specifies the OpenVMS password at the password prompt.

 	User Action:

 	No action is required if you want to be logged into OpenVMS only.
 	If you want to be logged into DCE as well as OpenVMS, perform a
 	manual DCE login using the DCE_LOGIN command or log out
  	and then log in specifying your DCE password at the password
 	prompt.

11  –  IL_VMSPWDSYNC

 OpenVMS password synchronized with DCE password

 	Explanation:

 	The user logged in specifying a DCE password. The user's DCE password
 	and OpenVMS password are different. The OpenVMS password was
 	sucessfully synchronized to match the DCE password.

 	User Action:

 	None.