Enables or disables specified user privileges. The F$SETPRV
function returns a list of keywords indicating user privileges;
this list shows the status of the specified privileges before
F$SETPRV was executed.
Your process must be authorized to set the specified privilege.
For detailed information on privilege restrictions, see the
description of the $SETPRV system service in the VSI OpenVMS
System Services Reference Manual.
Format
F$SETPRV(priv-states)
1 – Return Value
A character string containing keywords for the current process
privileges before they were changed by the F$SETPRV function.
2 – Argument
priv-states
Specifies a character string defining a privilege, or a list of
privileges separated by commas (,).
For a list of process privileges, see the OpenVMS User's Manual.
3 – Examples
1.$ OLDPRIV = F$SETPRV("OPER,NOTMPMBX")
$ SHOW SYMBOL OLDPRIV
OLDPRIV = "NOOPER,TMPMBX"
In this example, the process is authorized to change the OPER
(operator) and TMPMBX (temporary mailbox) privileges. The
F$SETPRV function enables the OPER privilege and disables the
TMPMBX privilege. In addition, the F$SETPRV function returns
the keywords NOOPER and TMPMBX, showing the state of these
privileges before they were changed.
You must place quotation marks (" ") around the list of
privilege keywords because it is a string literal.
2.$ SHOW PROCESS/PRIVILEGE
05-JUN-2001 15:55:09.60 RTA1: User: HELRIEGEL
Process privileges:
Process rights identifiers:
INTERACTIVE
LOCAL
$ NEWPRIVS = F$SETPRV("ALL, NOOPER")
$ SHOW SYMBOL NEWPRIVS
NEWPRIVS = "NOCMKRNL,NOCMEXEC,NOSYSNAM,NOGRPNAM,NOALLSPOOL,
NOIMPERSONATE,NODIAGNOSE,NOLOG_IO,NOGROUP,NOACNT,NOPRMCEB,
NOPRMMBX,NOPSWAPM,NOALTPRI,NOSETPRV,NOTMPMBX,NOWORLD,NOMOUNT,
NOOPER,NOEXQUOTA,NONETMBX,NOVOLPRO,NOPHY_IO,NOBUGCHK,NOPRMGBL,
NOSYSGBL,NOPFNMAP,NOSHMEM,NOSYSPRV,NOBYPASS,NOSYSLCK,NOSHARE,
NOUPGRADE,NODOWNGRADE,NOGRPPRV,NOREADALL,NOSECURITY,OPER"
$ SHOW PROCESS/PRIVILEGE
05-JUN-2001 10:21:18.32 User: INAZU Process ID: 00000F24
Node: TOKNOW Process name: "_FTA23:"
Authorized privileges:
NETMBX SETPRV SYSPRV TMPMBX
Process privileges:
ACNT may suppress accounting messages
ALLSPOOL may allocate spooled device
ALTPRI may set any priority value
AUDIT may direct audit to system security audit log
BUGCHK may make bug check log entries
BYPASS may bypass all object access controls
CMEXEC may change mode to exec
CMKRNL may change mode to kernel
DIAGNOSE may diagnose devices
DOWNGRADE may downgrade object secrecy
EXQUOTA may exceed disk quota
GROUP may affect other processes in same group
GRPNAM may insert in group logical name table
GRPPRV may access group objects via system protection
IMPERSONATE may impersonate another user
IMPORT may set classification for unlabeled object
LOG_IO may do logical i/o
MOUNT may execute mount acp function
NETMBX may create network device
OPER may perform operator functions
PFNMAP may map to specific physical pages
PHY_IO may do physical i/o
PRMCEB may create permanent common event clusters
PRMGBL may create permanent global sections
PRMMBX may create permanent mailbox
PSWAPM may change process swap mode
READALL may read anything as the owner
SECURITY may perform security administration functions
SETPRV may set any privilege bit
SHARE may assign channels to non-shared devices
SHMEM may create/delete objects in shared memory
SYSGBL may create system wide global sections
SYSLCK may lock system wide resources
SYSNAM may insert in system logical name table
SYSPRV may access objects via system protection
TMPMBX may create temporary mailbox
UPGRADE may upgrade object integrity
VOLPRO may override volume protection
WORLD may affect other processes in the world
Process rights:
INTERACTIVE
LOCAL
System rights:
SYS$NODE_TOKNOW
$ NEWPRIVS = F$SETPRV(NEWPRIVS)
$ SHOW PROCESS/PRIVILEGE
05-JUN-2001 16:05:07.23 RTA1: User: JERROM
Process privileges:
OPER operator privilege
Process rights identifiers:
INTERACTIVE
LOCAL
In this example, the DCL command SHOW PROCESS/PRIVILEGE is
used to determine the current process privileges. Note that the
process has no privileges enabled.
The F$SETPRV function is then used to process the ALL keyword
and enable all privileges recording the previous state of each
privilege in the symbol NEWPRIVS. Next, F$SETPRV processes
the NOOPER keyword and disables the OPER (operator) privilege,
recording the previous state of OPER in NEWPRIVS. Note that the
OPER privilege appears in the returned string twice: first as
NOOPER and then as OPER.
Entering the command SHOW PROCESS/PRIVILEGE now shows that the
current process has all privileges enabled except OPER.
If the returned string is used as the parameter to F$SETPRV,
the process has the OPER privilege enabled. This occurs because
the OPER command was present twice in the symbol NEWPRIVS.
As a result, F$SETPRV looked at the first keyword NOOPER and
disabled the privilege. Finally, after processing several other
keywords in the NEWPRIVS string, the OPER keyword is presented,
allowing F$SETPRV to enable the OPER privilege.
If you are using the ALL or NOALL keywords to save your
current privilege environment, VSI recommends that you perform
the following procedure to modify the process for a command
procedure:
$ CURRENT_PRIVS = F$SETPRV("ALL")
$ TEMP = F$SETPRV("NOOPER")
If you use this procedure, you can then specify the following
command statement at the end of your command procedure so that
the original privilege environment is restored:
$ TEMP = F$SETPRV(CURRENT_PRIVS)
3.$ SAVPRIV = F$SETPRV("NOGROUP")
$ SHOW SYMBOL SAVPRIV
SAVPRIV = "GROUP"
$ TEST = F$PRIVILEGE("GROUP")
$ SHOW SYMBOL TEST
TEST = "TRUE"
In this example, the process is not authorized to change the
GROUP privilege; however, the F$SETPRV function still returns
the current setting for the GROUP privilege.
The F$PRIVILEGE function is used to see whether the process has
GROUP privilege. The return string, TRUE, indicates that the
process has GROUP privilege, even though the F$SETPRV function
attempted to disable the privilege.