1 /AUTHENTICATE
Optional. Default: None.
Specifies that you want the TELNET session to use Kerberos
features.
NOTE
The /AUTHENTICATE qualifier also can be used with the TELNET
commands OPEN and CONNECT.
2 /BIND_SESSION
/BIND_SESSION network_device
Optional. Default: None.
Binds a TELNET terminal device to an existing network device. If
the bind is successful, the DCL symbol $TELNET_DEVICE contains
the TNA device name.
3 /CREATE_SESSION
Optional. Default: None.
Specifies that TELNET should create a pseudo device (network
terminal) and connect it to the specified remote port. For
additional information, see the CREATE_SESSION command. You can
use the following qualifiers with CREATE_SESSION:
o /NOTIMEOUT
o /TIMEOUT=option
Options include:
NOIDLE
IDLE=delta_time_interval
Specifies the delta time interval to wait with no activity
before closing the connection. The general delta time
format is hh:mm:ss:cc.
NORECONNECT
RECONNECT=delta_time_interval
Specifies the delta time interval to wait before retrying
a connect request. The general delta time format is
hh:mm:ss:cc.
o /PERMANENT Optional.
o /PROTOCOL=option
Optional. Default: NONE.
Options include:
- NONE
Data is sent with no interpretation (raw).
- NVT
Network Virtual Terminal (NVT), TELNET's internal
representation of a standard network terminal. NVT format
is standard 7-bit ASCII code transmitted in 8-bit octets,
the canonical form of data representation used by both the
client and the server.
- TELNET
Standard TELNET protocol.
- RLOGIN
Standard RLOGIN protocol.
4 /DELETE_SESSION
Optional. Default: None.
Specifies that TELNET should delete the specified pseudo device
(network terminal). For additional information, see the DELETE_
SESSION command.
5 /FORWARD
/FORWARD
/NOFORWARD
Optional. Default: /NOFORWARD.
Forwards a copy of your Kerberos tickets to the remote host.
The /NOFORWARD qualifier overrides any forwarding specified in
your machine's configuration files. You must request forwardable
tickets at the same time that you issue the KINIT command.
You must use the /AUTHENTICATE qualifier when you specify the
/FORWARD qualifier.
6 /LOG_FILE
/LOG_FILE=file
Optional. Default: No logging.
An optional log file that contains all session output. Using this
option does not affect your terminal output. You cannot use this
option for TN3270 sessions.
7 /NOINTERACTIVE
Optional. Default: TELNET command mode.
Disables the capability of using the escape character to leave
a session and return to the TELNET prompt. This option is useful
when the TELNET command is referenced in a command procedure in a
captive account.
8 /PORT
/PORT=n
Optional. Default: 23.
Remote port to which you want your TELNET process to connect. Use
this qualifier only if you are connecting to a host that does not
use the standard TELNET port.
9 /REALM
/REALM=realm-name
Optional.
Requests Kerberos tickets for the remote host in the specified
realm, instead of determining the realm itself.
You must use the /AUTHENTICATE qualifier when you specify the
/REALM qualifier.
10 /TERMINAL_TYPE
/TERMINAL_TYPE=type
Optional. Default: None.
The type of terminal to emulate. Enter the full specification for
one of these terminals:
o IBM-3278-2
o IBM-3278-3
o IBM-3278-4
o IBM-3278-5
o VT100
o VT200
o VT300
o VT400
o VT500
11 /UNBIND_SESSION
/UNBIND_SESSION network_device terminal_device
Optional.
Unbinds a network device (BGx:) from a TELNET terminal device
(TNAx:) that was initially bound by a BIND_SESSION command or
qualifier.