Specifies the class or classes to be added to the current display.
Format: ADD class[,...] [/qualifier,...]
NOTE: For a description of each class and the field names
within each class, type HELP CLASSES from the command prompt.
1 – CLUSTER
Adds the Cluster class to the display.
1.1 – Qualifiers
1.1.1 /ALL
Adds all the fields in the Cluster class to the display. Format: ADD CLUSTER/ALL
2 – SYSTEMS
Adds the Systems class to the display. Optionally, specific systems can be added to the display. The systems to be added can be specified by type, system ID number, or node name. By default all systems are displayed. Format: ADD SYSTEMS [/qualifier,...]
2.1 – Qualifiers
2.1.1 /ALL
Adds all the fields in the Systems class to the display. Format: ADD SYSTEMS/ALL
2.1.2 /ID
Specifies the system ID number of the system to be added to the
display. The system is assumed to be removed from the display
via the REMOVE SYSTEMS/ID or /NODE commands. To specify a
hexadecimal value as the ID number, precede the value with %X.
Optionally, ALL can be specified to restore all SYSTEMS that were
previously removed via the REMOVE SYSTEMS/ID or /NODE commands.
Format: ADD SYSTEMS/ID=(system-ID[,...])
ADD SYSTEMS/ID=ALL
If only one system ID is specified, the parenthesis can be omitted.
Examples: ADD SYSTEMS/ID=101
ADD SYSTEMS/ID=(206,%XF2A)
2.1.3 /NODE
Specifies the node name of the system(s) to be added to the display.
The system is assumed to be removed from the display via the REMOVE
SYSTEMS/ID or /NODE commands. Optionally, ALL can be specified to
restore all SYSTEMS that were previously removed via the REMOVE
SYSTEMS/ID or /NODE commands.
Format: ADD SYSTEMS/NODE=(node-name[,...])
ADD SYSTEMS/NODE=("node-name"[,...])
ADD SYSTEMS/NODE=ALL
If only one node name is specified, the parenthesis can be omitted.
Quotation marks are optional except when specifying a system
with a node name of "ALL."
Examples: ADD SYSTEMS/NODE=DARBY
ADD SYSTEMS/NODE=("DARBY","DOOLEY","ALICAT","ALL")
2.1.4 /TYPE
Specifies the type of system to be added to the display. Systems of
the specified type are assumed to be removed from the display via the
REMOVE SYSTEMS/TYPE command. The type can be any of the valid system
types as displayed in the HW_TYPE field prior to their removal. If the
string which specifies the system type contains spaces, slashes or
hyphens, then the string must be delimited by double quotation marks.
If /TYPE=ALL is specified, then all nodes are added to the display.
Format: ADD SYSTEMS/TYPE=(system-type,"system-type"[,...])
ADD SYSTEMS/TYPE=ALL
If only one system type is specified, the parenthesis can be omitted.
Examples: ADD SYSTEMS/TYPE="VAX 8650"
ADD SYSTEMS/TYPE=(HS90,"VAX 8800")
3 – MEMBERS
Adds the Members class to the display. Format: ADD MEMBERS
3.1 – Qualifiers
3.1.1 /ALL
Adds all the fields in the Members class to the display. Format: ADD MEMBERS/ALL
4 – CIRCUITS
Adds the Circuits class to the display. Optionally, circuits which are in a particular state can be added to the display. By default all circuits are displayed. Format: ADD CIRCUITS [/qualifier,...]
4.1 – Qualifiers
4.1.1 /ALL
Adds all the fields in the Circuits class to the display. Format: ADD CIRCUITS/ALL
4.1.2 /TYPE
Specifies the type of circuits to add to the display. Valid circuit
types are:
OPEN - Circuits in the open state.
NOOPEN - Circuits in the closed state or any of the
open-in-progress or close-in progress states.
ALL - All types of circuits.
Format: ADD CIRCUITS/TYPE=(type[,...])
If only one type is specified, the parenthesis can be omitted.
5 – CONNECTIONS
Adds the Connections class to the display. Optionally, connections in a particular state, or connections of a particular name can be added to the display. By default, all connections are displayed. Format: ADD CONNECTIONS [/qualifier,...]
5.1 – Qualifiers
5.1.1 /ALL
Adds all the fields in the Connections class to the display.
Format:
ADD CONNECTIONS/ALL
5.1.2 /NAME
Specifies the local process names of connections that are to be added
to the display. /NAME can specify the local process name of a
connection that was previously removed from the display via the REMOVE
CONNECTION/NAME command or ALL to restore all connections.
Up to 16 characters of the local process name can be specified.
If abbreviated, all connections with local process names matching
the characters specified will be added to the display.
Format: ADD CONNECTIONS/NAME=(local-process-name[,...])
ADD CONNECTIONS/NAME=ALL
If only one name is specified, the parenthesis can be omitted.
Examples: ADD CONNECTIONS/NAME=(VMS$DISK_CL_DRVR,VMS$TAPE_CL_DRVR)
ADD CONNECTIONS/NAME=VMS$
5.1.3 /TYPE
Specifies the type of connections to add to the display. Valid
connection types are:
OPEN - Connections in the open state.
NOOPEN - Connections in the closed state, listen states, or any of
the connect, disconnect, accept, reject, or failed states.
ALL - All types of connections.
Format: ADD CONNECTIONS/TYPE=(type[,...])
If only one type is specified, the parenthesis can be omitted.
6 – COUNTERS
Adds the Counters class to the display.
Format:
ADD COUNTERS
6.1 – Qualifiers
6.1.1 /ALL
Adds all the fields in the Counters class to the display.
Format:
ADD COUNTERS/ALL
7 – CREDITS
Adds the Credits class to the display.
Format:
ADD CREDITS
7.1 – Qualifiers
7.1.1 /ALL
Adds all the fields in the Credits class to the display.
Format:
ADD CREDITS/ALL
8 – LOCAL_PORTS
Adds the Local Ports class to the display.
Format:
ADD LOCAL_PORTS
8.1 – Qualifiers
8.1.1 /ALL
Adds all the fields in the Local_Ports class to the display.
Format:
ADD LOCAL_PORTS/ALL
9 – ERRORS
Adds the Errors class to the display.
Format:
ADD ERRORS
9.1 – Qualifiers
9.1.1 /ALL
Adds all the fields in the Errors class to the display.
Format:
ADD ERRORS/ALL