There are several SHOW subcommands. Select the one you want from
the choices below.
1 – ENVIRONMENT
Displays the target nodes or cluster where SYSMAN is executing
commands.
Format
SHOW ENVIRONMENT
1.1 – Description
The SHOW ENVIRONMENT command displays the current management
environment. It can be the local cluster, local or remote nodes,
or a nonlocal cluster. SYSMAN indicates if the environment is
limited to individual nodes or if it is clusterwide. It also
shows the current user name.
The environment exists until you exit from SYSMAN or enter
another SET ENVIRONMENT command.
1.2 – Examples
1.SYSMAN> SHOW ENVIRONMENT
%SYSMAN-I-ENV, Current command environment:
Clusterwide on local cluster
Username ALEXIS will be used on nonlocal nodes
This command shows the current environment is the local
cluster. User name ALEXIS will be used on other nodes in the
cluster.
2.SYSMAN> SHOW ENVIRONMENT
%SYSMAN-I-ENV, Current command environment:
Clusterwide on remote cluster NODE21
Username ALEXIS will be used on nonlocal nodes
This command shows that the command environment is a nonlocal
cluster where NODE21 is a member.
3.SYSMAN> SHOW ENVIRONMENT
%SYSMAN-I-ENV, Current command environment:
Individual nodes: NODE22,NODE23
At least one node is not in local cluster
Username ALEXIS will be used on nonlocal nodes
This command shows that the command environment consists of two
nodes.
2 – KEY
Displays key definitions created with the DEFINE/KEY command.
Format
SHOW KEY [key-name]
2.1 – Parameter
key-name
Specifies the name of the key whose definition you want
displayed. See the DEFINE/KEY command for a list of valid key
names.
2.2 – Qualifiers
2.2.1 /ALL
Displays all the key definitions in the specified state or
states. Specifying a key name is not necessary.
2.2.2 /BRIEF
Displays only the key definition. By default, the system displays
all the qualifiers associated with the key definition, including
any specified state, unless you use the /BRIEF qualifier.
2.2.3 /DIRECTORY
Displays the names of all the states for which you have defined
keys. If you have not defined keys, the SHOW KEY/DIRECTORY
command displays the DEFAULT and GOLD states (which is the
default SYSMAN keypad).
2.2.4 /STATE
/STATE=(state, state...)
Specifies the name of a state for which the specified key
definitions are to be displayed. If you select more than one
state name, separate them with commas and enclose the list in
parentheses.
2.3 – Description
Specifies the name of the key whose definition you want
displayed. See the DEFINE/KEY command for a list of valid key
names.
2.4 – Example
SYSMAN> SHOW KEY/ALL
DEFAULT keypad definitions:
KP0 = "SHOW ENVIRONMENT" (echo)
KP1 = "SHOW PROFILE" (echo)
SYSMAN>
This command displays all the key definitions currently in
effect.
3 – PROFILE
Displays the privileges and the default device and directory
being used in the current environment.
Format
SHOW PROFILE
3.1 – Qualifiers
3.1.1 /DEFAULT
Displays the default disk device and directory name that the
system uses in this environment to locate and catalog files.
3.1.2 /PRIVILEGES
Displays only the privileges in effect for the current
environment.
3.2 – Description
The SHOW PROFILE command displays the privileges and the
default device and directory that is being used in the current
environment. You can modify these attributes with the SET PROFILE
command.
These values remain in effect until you change environments or
enter another SET PROFILE command.
3.3 – Example
SYSMAN> SHOW PROFILE
%SYSMAN-I-DEFDIR, Default directory on node NODE21 --
WORK1:[BERGERON]
%SYSMAN-I-DEFPRIV, Process privileges on node NODE21 --
TMPMGX
OPER
NETMBX
SYSPRV
This command shows the default device and directory as well as
current privileges.
4 – TIMEOUT
Displays the amount of time SYSMAN waits for a node to respond.
By default, there is no timeout period.
Format
SHOW TIMEOUT
4.1 – Example
SYSMAN> SHOW TIMEOUT
%SYSMAN-I-TIMEVAL, timeout value is 00:00:04.00
This command displays the current timeout value, which is 4
seconds.