Allows you to remove a device from the the permanent list.

    Requires SYSPRV privilege.

    Format

      DELETE DEVICE  device-name:

1  –  Parameters

 device-name:

    The name of the device whose characteristics are to be deleted.
    The device name has the form ddcu,

    where:

    dd    is the device code-for example, LP. (The driver name
          corresponds to the device code; in this case, the driver
          name would be SYS$LPDRIVER.)

    c     is the controller designation A through Z; unless UCM
          specifies a different letter, all USB devices are A.

    u     is the unit number (0 through 9999).

    OpenVMS device names are made up of the two-character device
    code, followed by the controller designation, the unit number
    (which can be 1 to 4 characters long), and, finally, a colon (:).

2  –  Example

  $  UCM
  Universal Serial Bus Configuration Manager, Version V1.0
  UCM> SHOW DEVICE /PERMANENT AGA0:
  DEVICE
  DEVICE_TYPE                     PERMANENT
  DEVICE_NAME_ROOT                AGA
  UNIT_NUMBER                     0
  BUS                             1
  PATH                            1.0.0.0.0.0
  END_DEVICE

  UCM> DELETE DEVICE AGA0:
  UCM> SHOW DEVICE /PERMANENT AGA0:
  %USB-E-NOSUCHDEV, Device name or device unit not found
  UCM>

      In this example, the first SHOW DEVICE AGA0: command displays
      information about the device that is in the permanent list.
      After the DELETE DEVICE AGA0: command, the second SHOW DEVICE
      AGA0: command displays an error message indicating that the
      device is no longer in the permanent list.